PCchips M754 Plus Series User Manual page 37

Parallel Port Mode
Use this item to set the parallel port mode. You
can select SPP (Standard Parallel Port), ECP
(Extended Capabilities Port), EPP (Enhanced
Parallel Port), or ECP + EPP.
EPP Version
Use this item to set the version of EPP while
the parallel port mode is set to EPP.
Parallel Port IRQ Use this item to assign either IRQ 5 or 7 to the
parallel port.
Parallel Port DMA
Use this item to assign a DMA channel to the
parallel port. The options are 0, 1 and 3.
Onboard IDE
Use this item to enable or disable either or both
of the onboard Primary and Secondary IDE
channels.
Ultra DMA Support Use this item to set Ultra DMA support for IDE
devices on the Primary or Secondary IDE
channels. You must enable this or UDMA
devices will not work at their intended speed.
OnBoard Sound This item enables or disables the onboard
audio chip.
OnBoard Modem This item enables or disables the onboard
modem chip.
OnBoard USB
Enable this item if you plan to use the USB
Function ports on this mainboard.
USB Function for
Enable this item if you plan to use the USB
DOS ports on this mainboard in a DOS environment.
3: BIOS Setup Utility
33