Pci / Plug And Play Setup Page - PCchips M754 Plus Series User Manual

Mainboard User's Manual
RTC Alarm Power
The system can be turned off with a software
command. If you enable this item, the system
On
can automatically resume at a fixed time based
on the system's RTC (realtime clock). Use the
items below this one to set the date and time of
the wake-up alarm. You must use an ATX
power supply in order to use this feature.

PCI / Plug and Play Setup Page

This page sets some of the parameters for devices installed on the
PCI bus and devices that use the system plug and play capability.
Plug and Play Aware O/S
Primary Graphics Adapter
Assign IRQ for VGA
DMA Channel 0
DMA Channel 1
DMA Channel 3
DMA Channel 5
DMA Channel 6
DMA Channel 7
IRQ3
IRQ4
IRQ5
IRQ7
IRQ9
IRQ10
IRQ11
IRQ14
IRQ15
Plug and Play Enable this item if you are using an O/S that
Aware O/S supports Plug and Play such as Windows 95 or
98.
Primary Graphics This item indicates if the primary graphics
adapter uses the PCI or the AGP bus. The
Adapter
default PCI setting still lets the onboard display
work and allows the use of a second display
card installed in a PCI slot.
Assign IRQ for If this item is enabled, an IRQ will be assigned
VGA to the PCI VGA graphics system. You set this
value to No to free up an IRQ.
30
Yes
PCI
Yes
PnP
PnP
PnP
PnP
PnP
PnP
PCI/PnP
PCI/PnP
PCI/PnP
PCI/PnP
PCI/PnP
ESC : Quit
PCI/PnP
F1 : Help
PCI/PnP
F5 : Old Values (Shift)F2
PCI/PnP
F6 : Load Optimal values
PCI/PnP
F7 : Load Best performance values
 : Select Item
PU/PD/+/- : Modify
: Color