Supermicro A+ Server 2123BT-HTR User Manual page 74

A+ Server AS -2123BT-Hxxx User's Manual
Network Stack Configuration
Network Stack
This setting allows you to Enable or Disable the UEFI Network Stack.
Ipv4 PXE Support
This setting allows you to Enable or Disable IPv4 PXE boot support. If disabled, IPv4 PXE
boot support will not be available.
Ipv4 HTTP Support
This setting allows you to Enable or Disable IPv4 HTTP boot support. If disabled, IPv4 HTTP
boot support will not be available.
Ipv6 PXE Support
This setting allows you to Enable or Disable IPv6 PXE boot support. If disabled, IPv6 PXE
boot support will not be available.
Ipv6 HTTP Support
This setting allows you to Enable or Disable IPv6 HTTP boot support. If disabled, IPv6 HTTP
boot support will not be available.
PXE Boot Wait Time
This setting allows you to set in a number field the wait time to press the ESC key to abort
the PXE boot. Default is 0.
Media Detect Count
This setting allows you set in a number field the number of times presence of media will be
checked. Default is 1.
SATA Configuration
This section displays the detected SATA devices installed on the system.
SATA Controller
This setting enables or disables the on chip SATA controller. The options are Enabled,
Disabled or Auto.
SATA Hot Plug
This setting enables or disables the on chip SATA hot plug feature. The options are Enabled,
Disabled.
SATA Information
This section displays information on the detected SATA devices:
• CPU1 SATA0 ~ CPU1 SATA7
74