Table of Contents
Advertisement
4. During Windows Setup, continue to the dialog where you select the drives on which to
install Windows. If the disk you want to use is not listed, click on "Load driver" link at the
bottom left corner.
To load the driver, browse the USB flash drive for the proper driver files.
•
Choose the SATA/sSATA AHCI driver indicated then choose the storage drive on which
you want to install it.
5. Once all devices are specified, continue with the installation.
6. After the Windows OS installation has completed, the system will automatically reboot
multiple times.
Figure 5-2. Load Driver Link
57
Chapter 5: Software
Advertisement
Table of Contents
