Installing An Ink Cartridge - Xerox W110 User Manual

Scanner Options, Maintenance and Troubleshooting
ERROR IMAGE CAUSE
ADF AFE R/W Test
Error
Firmware checks
whether the
hardware AFE is
reading and
writing normally
when booting.
If it is running
abnormally, the
scanner cannot
scan.
System Input
Buffer Over Run
This error happens
when the ASIC
receives too many
images at once.
ADF Lamp Error
The ADF lamp has
stopped working.

Installing an Ink Cartridge

The following steps are only for the W130 (P/N 97-0130-00A) with the imprinter already installed.
1. Turn off the scanner.
2. Open the imprinter door.
3. Remove the protective tape from the ink cartridge.
User Guide
Xerox
RESOLUTION
Turn off the scanner. Contact
Technical Support and send the
scanner for repair.
Turn off the scanner. Contact
Technical Support and send the
scanner for repair.
Turn off the scanner. Contact
Technical Support and send the
scanner for repair.
®
W130 / W110 Scanner
6-17