Table of Contents
Advertisement
Apple CarPlay Setting
[Apple CarPlay] is selected on the Application setup menu in step 3.
Refer to "Application Setup Operation" (page 22).
Setting the Wi-Fi ON/OFF
You can enjoy wireless connection between iLX-107 and iPhone instead
of USB connection in Apple CarPlay mode.
Setting item: Wi-Fi
Setting contents: OFF / ON (Initial setting)
OFF:
Wi-Fi function is not available.
ON:
Wi-Fi function is available. At this time, an iPhone
can be connected to this unit via Wi-Fi. After
connected via Wi-Fi, you can enjoy Apple CarPlay
on iLX-107 wirelessly.
• After the above setting, turn the ignition key off (ACC OFF) and on
(ACC ON) again.
Registering the Apple CarPlay Device
After turning on the "Wi-Fi", this item can be carried out.
This function is used when an Apple CarPlay Device is searched and
connected from this unit, or an Apple CarPlay Device is registered.
• You can touch [ ] on Home screen to change to Apple CarPlay
devices list while "Wi-Fi" is ON.
• When no iPhone is connected, you can also change to Apple CarPlay
devices list by pressing and holding Siri button.
1
Touch [ ] of No Device to search for an Apple
CarPlay device.
Make sure the iPhone is on Bluetooth devices screen for
paring.
A maximum of 10 Apple CarPlay devices can be searched.
• If a confirmation prompted, touch [OK] to disconnect the
currently connecting iPhone and continue to search other Apple
CarPlay devices. Touch [Cancel] to keep the current connection
and stop the search.
2
Touch a desired Apple CarPlay device to connect
and then follow the prompt to operate.
• If an Apple CarPlay device has been registered, touch
[Connect] directly.
• Touch [Delete] to omit registered Apple CarPlay device.
However, you cannot delete the connecting Apple CarPlay
device.
Steering wheel Setting
This setting influences Apple CarPlay mode.
Setting item: Steering wheel
Setting contents: Left (Initial setting) / Right
Setting the Siri Microphone Effect
You can turn on or off the Siri Microphone Effect.
Setting item: Microphone EC / NR
Setting contents : ON (Initial setting:) / OFF
Selecting the Output Speaker
You can select which speaker in the car will output the audio from the
phone.
Setting item: Call Speaker Select
Setting contents: All (Initial setting) / Front L / Front R / Front LR
The sound is output from all speakers in car.
All:
Front L:
The sound is only output from the front left speaker.
Front R:
The sound is only output from the front right
speaker.
Front LR:
The sound is output from the front left and front
right speakers.
Adjusting the Microphone Level
You can adjust the transmit volume.
Setting item: Microphone Level
Setting contents: 1 to 11 (Initial setting: 5)
• The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
External Accessory Control Setup
[External Accessory Ctrl] is selected on the Application Setup Menu
screen in step 3. See "Application Setup Operation" (page 22).
Setting the External Accessory Control
When you have connected the optional External Accessory Control
module, set this setting to "ON" to turn the headlights ON/OFF or
adjust the air suspension from this unit.
Setting item: External Accessory Ctrl
Setting contents: OFF (Initial setting) / ON
• When set to "ON, " the External Parts icon is displayed on the main
screen.
• For details on the External Accessory screen and its operation, see
"External Accessory Control Operation" (page 27).
24
-EN
Advertisement
Table of Contents
