Service Manual
Step
11.Electric box assy
assy and then remove the electric box
assy.
12.Remove connection pipe clamp
At the back of the unit, remove the
and then remove the connection pipe
clamp.
13.Remove evaporator assy
Adjust the position of connection pipe
on evaporator slightly and then lift the
evaporator upwards to remove it.
14.Remove stepping motor
then remove the step motor.
Installation and Maintenance
Procedure
Electric box assy
Screw
Connection pipe clamp
Evaporator assy
Screws
Connection pipe
Step motor
Screw
Screws
Screws
61