Emergency Procedure For Lost Ip Settings - Panasonic KAIROS Operating Manual

2.3 Emergency Procedure for Lost IP Settings:

In case the 1Gb network adaptor settings (in System Settings Menu) got lost and need to be reconfigured,
here is the description how to proceed. Keep in mind, if those Network settings are lost or unknown, the
actual displayed fields for IP address, Netmask & Gateway (Picture 2.3.1) would be empty, and as a
result, the Kairos Creator can NOT connect anymore to KAIROS Core at all. Therefore, the Network
configuration needs to be done directly on KAIROS Core.
Picture 2.3.1
Before continuing, connect a Keyboard straight to the KAIROS Core and repower the system. There are
Text and objects appearing on screen during boot, such as:
Picture 2.3.2
After a few minutes, a blue background screen is revealed with boot information (Picture 2.3.4). There
is a time slot of approx. 2-3 seconds in order to hit the cursor "up-↑" or "down-↓"-button on the Keyboard
in order to stop the time-out for the auto-boot sequence. Selecting "KairosCore....Network Configuration"
will launch after confirmation of a subroutine to be able to access the 1Gb network adapter settings on
KAIROS Core.
Note: All navigations from now on can be simply done using the arrow/cursor buttons (←↑↓→) on the
connected Keyboard, and the selected item can either be confirmed or canceled using the "Return" or
"Enter" key of the connected Keyboard.
Picture 2.3.4
Picture 2.3.5
When in the Setup tab "System
settings," this information is
lost or unknown and needs to
be reconfigured. Follow the
steps described below.
The next upcoming screen is only informing about the
boot progress....
Use cursor up/down
Keyboard buttons to select
the 2nd listed item "Network
Configuration." Press
"Return" or "Enter" key to
confirm (Picture 2.3.4).
the
18