Corner Pinning" Tool - Panasonic KAIROS Operating Manual

3.3.3.3.4 "Corner Pinning" tool

Picture 3.3.3.3.4.1
The "Corner Pinning" tool allows you to position every corner of an image individually by left mouse
clicking on the corner and dragging it to the desired position within the viewing pane. Clicking the cursor
inside the picture allows you to re-position the image, whether or not the corners are shifted.
In "Parameter View," numeric values can be entered or modified using the drag-pads next to the value
boxes for each individual corner ("Top left X/Y," "Top right X/Y," "Bottom left X/Y," & "Bottom right X/Y").
Enable and Disable the effect with the switch and "Reset to Default" with the "rewind" button. Overall,
the Corner Pinning "Interpolation Mode" can be changed between 2D and 3D.
Note: When positioning a Layer, regardless of "working area" or "drag pad" control use, while holding
down the keyboard "Ctrl"-key, only horizontal positioning is applied to the Layer object. When holding
down the keyboard "Shift"-key instead, only vertical positioning is applied to the Layer object.
Picture 3.3.3.3.4.2
40