Picture 3.3.5.2.14
In order to set an "Audio source" for a Kairos Core Multiviewer Output (DP/HDMI), click the "
in "Multiviewer Settings" at the top of the "Parameter View" panel next to the "Audio source" icon
(scene "Main" is selected in this example) to open the overlay window for this selection, listing all
available "Audio sources." The selection contains all existing "Scenes," "Inputs," "FxInputs,"
"ClipPlayers," a configurable "AudioMixer," and "Audio Generators."
The speaker
symbol
is visualizing the Audio
source, selected for this
Multiviewer
DP/HDMI
output.
Picture 3.3.5.2.15
Note: For more details regarding Audio controls in general, such as "Shuffle, Gain & Audio Delay, Audio
Generators, etc." please refer to section "3.3.3.5 Audio Mixer" in this manual, starting on page 47.
" symbol
60