Panasonic KAIROS Operating Manual page 88

4K NDI and 4K Streams are not supported.
Apart from ST2110 IP inputs (Picture 3.3.9.2.2), up to 8 modules (Deltacast) – 4 Inputs each – can be
connected for SDI input signals.
(Deltacast is also providing modules for HDMI & DP In/Out)
When selecting "SDI" as input format (Picture 3.3.9.2.5), the next selection
defines the module number 1-8 (Picture 3.3.9.2.6). Each module provides 4
inputs to select from "In 1-4" (Picture 3.3.9.2.7). Finally, Kairos Core can auto-
sense the connected input format, or you can choose directly between 12G
(Single Link), 2SI (2 Sample Interleave), SQD (Square Division). You can also
"Disable" the selected input (Picture 3.3.9.2.8).
Picture 3.3.9.2.6
For a Stream input selection, the Stream type (RTP, SRT, RTMP, & RTSP) and the entries for IP and
Port number are required in a first step:
Picture 3.3.9.2.9
For an "NDI" input, an NDI stream can be selected from the NDI streams published on
the network:
Picture 3.3.9.2.10
Default NDI stream selection is "None."
Picture 3.3.9.2.11
Selecting the drop-down menu on the far right shows the available NDI network streams.
Picture 3.3.9.2.12
After selecting an available network stream and fetching the signal, the source indicator turns green
Picture 3.3.9.2.13
The "More..." button to the right of each input opens a pop-up window with
advanced input setup options (Picture 3.3.9.2.14).
Picture 3.3.9.2.5
Picture 3.3.9.2.7 Picture 3.3.9.2.8
Picture 3.3.9.2.14
.
88