Transition Section - Panasonic KAIROS Operating Manual

4.4 Transition Section

There is a dedicated pair of "Cut" & "Auto" buttons per Transition, each with their individual applicable
"Transition Duration" rate. When press & hold one of the buttons labeled "1-8" right above the "Cut" &
"Auto" pairs of buttons, the lower numeric keypad will be auto-delegated in order to enter a transition
duration rate in frames, or to cancel the dialog.
Fader- (Lever-) arm with "Cut" & "Auto" function buttons in default position underneath ("Cut" = Left,
"Auto" = Right).
Transition delegation buttons 1–8, in order to define the next Transition executed with Fader, "Cut" or
"Auto." Multiple selections for next Transition elements are also applicable by pressing multiple
delegation buttons at once or press & hold a delegation and add or subtract other delegations.
"T-Dur" button in order to apply Transition duration rate for the "Auto" transition (Main) button beneath
Fader- (Lever-) arm.
Picture 4.4.3
Right above the Transition display, a row of buttons is located, which are
used to temporarily overwrite a user-defined Transition displayed in the
bottom row (Picture 4.4.2).Together with the enabled buttons "A/B" or
"In/Out," one of the above-listed Transitions can be used instead and need
to be executed with the main "Auto" transition button or the designated
Lever/Fader arm. However, pressing one of the dedicated "Auto" buttons
(Picture 4.4.1) will always execute the transition originally programmed.
Picture 4.4.1
Picture 4.4.2
106