Remove Collected Water: Continuous Drainage Middle Hole Option - Gree GRP-E08SH-R4W Owner's Manual

CLEANING AND MAINTENANCE
Remove Collected Water: Continuous
Drainage Middle Hole Option
ATTENTION:
surface and make sure drainage hose is clear of any obstructions and is directed downward. Placing portable on
an uneven surface or improper hose installation may result in water filling up the chassis and causing the unit to
shut off. Empty water in the chassis if shut off occurs, then check portable location and hose for proper setup.
NOTICE:
Water can automatically empty into a floor drain by attaching a drainage hose.
1
Middle Hole
Remove the Continuous Drain Cap by turning it
counter clockwise, then remove the
from the spout.
When using continuous drainage option from the middle hole, place portable on a level
Rubber Plug
2
Screw the
Drain Connector
package) to the spout by turning clockwise.
Insert the
Drainage Hose
.
Connector
23
(included in the
into the
Drain