Royal Enfield Bullet 500 2018 Owner's Manual page 55

WHEEL REMOVAL / ASSEMBLY

Locate stepped spacer in the left side of the
hub with its larger face outside.

Locate front wheel between the fork ends duly
ensuring the spacer and the speedo drive do
not fall off and the brake disc is correctly
positioned between the brake pads.

Ensure the peg in
the speedo drive is
correctly positioned
in the slot in the right
side fork end.
Insert axle through the right side fork end and gently
tap it in fully.

Locate washer and
nut on the left side.

Hold the axle from the right
side and tighten nut on left
side to a torque of 7 KgM
(70 Nm).

Hold the pinch bolt and
tighten the U-Nut on the
right side fork end.

Rotate the wheel and check for smooth
rotation.

Connect the speedo cable to speedo drive and
check for proper working of speedo meter.
 Depress brake lever 2 or 3 times to check front
brake efficiency.
54