Pre Operative Checks - Royal Enfield Bullet 500 2018 Owner's Manual

Table of Contents

Advertisement

PRE OPERATIVE CHECKS

A careful check of the following must be carried out everytime before riding and especially after long periods
of storage to determine if additional maintenance is necessary.
1. Adequate fuel in the tank.
2. Free play and smoothness of all operating cables.
3. Free movement of steering.
4. Any cuts, cracks in the tyre and correct tyre pressure.
5. Oil level: Top up if necessary. Do not overfill.
6. Rear chain for proper tension.
7. Brakes, steering and throttle for responsiveness.
8. Wheel spoke for proper tightness, no breakage,
9. Headlamp, tail lamp, brake lamp and directional lamps for proper operation.
10. Check ABS lamp glows as soon as ignition switch & kill switch are 'ON' and goes 'OFF' as soon as
vehicle reaches a speed of 5 Km/h (3 mph).
WARNING
For your personal welfare and safety, all the points mentioned above should be performed periodically.
Failure to do so may affect safe operation and damage your motorcycle and could result in an accident
causing serious injury or loss of life.
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Classic 500 2018

Table of Contents