Table of Contents
Advertisement
Tail/Stop/Thm Signal Lamp
1. Open the
trunk.
Remove the convenience net if you
have one. Unhook the net from the upper wing nut.
2. Remove the upper
(convenience net) wing
nut, if equipped.
3.
Pull the carpet away
from the rear of the
vehicle.
4. Unscrew the two remaining wing nuts.
5 . Pull the assembly from the body carefully.
6.
To remove a socket, press the tab, turn the socket
counterclockwise
and
pull it out.
7. Pull the bulb out. Do not twist it.
8. Push the new bulb into the socket.
9. Replace the socket in the assembly.
10. Tighten the socket (both kinds) by turning
it clockwise.
11. Install the assembly and the two lower wing nuts.
12. Replace the carpeting.
13. Replace the upper (convenience net) wing nut, if
14. Replace the convenience net, if equipped.
equipped.
6-34
Advertisement
Table of Contents
