Table of Contents
Advertisement
Setting and canceling the function
To switch between setting and canceling, follow the procedure
below:
STEP
1
Close all the doors and switch the "ENGINE START
STOP" switch to IGNITION ON mode. (Perform the step 2
within 10 seconds.)
STEP
2
Shift position linked door lock-
ing function*
Shift position linked door
unlocking function*
Speed linked door locking func-
tion
Driver's door linked door unlock-
ing function
*: Vehicles with an automatic transmission only
When the setting or canceling operation is complete, all doors are
locked and then unlocked.
IS250/220d/200d_EE
1-2. Opening, closing and locking the doors and trunk
Shift lever posi-
Function
Shift the shift lever to P or N,
press and hold the driver's door
lock switch (
or
about 5 seconds then release.
The shift lever and switch posi-
tions
corresponding
desired function to be set are
shown as follows.
Use the same procedure to can-
cel the function.
Driver's door
lock switch posi-
tion
tion
P
N
1
) for
to
the
61
Advertisement
Table of Contents
