Lexus IS220d 2012 Manual page 542

5-2. Steps to take in an emergency
Emergency start function
When the engine does not start, the following steps can be used as
an interim measure to start the engine if the "ENGINE START
STOP" switch is functioning normally:
Vehicles with an automatic transmission
STEP 1
Set the parking brake.
STEP 2
Put the shift lever in P.
STEP 3
Set the "ENGINE START STOP" switch to ACCESSORY
mode.
STEP 4
Press and hold the "ENGINE START STOP" switch for
about 15 seconds while depressing the brake pedal firmly.
Vehicles with a manual transmission
STEP 1
Set the parking brake.
STEP 2
Put the shift lever in N.
STEP 3
Set the "ENGINE START STOP" switch to the ACCES-
SORY mode.
STEP 4
Push and hold the "ENGINE START STOP" switch for
about 15 seconds while depressing the brake pedal and
clutch pedal firmly.
Even if the engine can be started using the above steps, the system
may be malfunctioning. Have the vehicle checked by any autho-
rized Lexus dealer or repairer, or another duly qualified and
equipped professional.
516
IS250/220d/200d_EE