4-3. Do-it-yourself maintenance
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have
blown. If this happens, check and replace the fuses as necessary.
STEP
1
Turn the "ENGINE START STOP" switch OFF.
STEP
2
Engine compartment (type B fuse box): Remove the
engine compartment cover. (P. 407)
STEP
3
Open the fuse box cover.
Engine compartment (type A fuse box: Left-hand drive vehi-
cles)
Engine compartment (type A fuse box: Right-hand drive vehi-
cles)
438
IS250/220d/200d_EE
Push the tabs in and lift the
lid off.
Push the tabs in and lift the
lid off.