2-2. Instrument cluster
Changing the indicator setting
The satellite switch can be used to change the set speed at which
the yellow speed or tacho indicator ring comes on.
The setting can be made only when the "ENGINE START
STOP" switch is in IGNITION ON mode and the vehicle is
stopped.
STEP
1
Push "
" or "
( ) Turn the speed or tacho indicator to "OFF" and then "ON" by
pushing the "ON/OFF" button. ( )
174
IS250/220d/200d_EE
" to select the speed or tacho indicator set mode.
After one second, the mode
enters the indicator setting
mode.
The speedometer or tachometer
needle moves to the previously
set speed.