Lexus IS220d 2012 Manual page 551

5-2. Steps to take in an emergency
Right-hand vehicles
Positive (+) battery terminal on your vehicle
Positive (+) battery terminal on the second vehicle
Negative (-) battery terminal on the second vehicle
Connect the jumper cable to ground on your vehicle as shown
in the illustration.
STEP 3
Start the engine of the second vehicle. Increase the
engine speed slightly and maintain at that level for
approximately 5 minutes to recharge the battery of your
vehicle.
STEP 4
Open and close any of the doors with the "ENGINE
START STOP" switch OFF.
STEP 5
Maintain the engine speed of the second vehicle and turn
the "ENGINE START STOP" switch to IGNITION ON
mode, then start the vehicle's engine.
STEP 6
Once the vehicle's engine has started, remove the jumper
cables in the exact reverse order in which they were con-
nected.
Once the engine starts, have the vehicle checked at any autho-
rized Lexus dealer or repairer, or another duly qualified and
IS250/220d/200d_EE
5
525