Table of Contents
Advertisement
STEP
12
Disconnect the hose from the valve on the tire and then pull
out the power plug from the power outlet socket.
STEP
13
To spread the liquid sealant evenly within the tire, immedi-
ately drive for about 5 km (3 miles).
STEP
14
STEP
15
IS250/220d/200d_EE
5-2. Steps to take in an emergency
• If the tire inflation pressure
exceeds
the
recommended
level, let out some air to adjust
the tire inflation pressure. (P.
512)
After driving for about 5 km (3
miles), stop your vehicle in a
safe place on a hard, flat surface
and reconnect the compressor.
Turn the compressor switch on
and wait for several seconds,
then turn it off. Check the tire
inflation pressure.
If the tire inflation pressure is
below 130 kPa (1.3 kgf/cm
or bar, 19 psi): The puncture
cannot be repaired. Contact
any authorized Lexus dealer,
tire dealer or repairer, or
another duly qualified and
equipped professional.
If the tire inflation pressure is
between 130 kPa (1.3 kgf/
2
cm
or bar, 19 psi) and a
point
below
the
mended level: The tire can be
5
2
recom-
509
Advertisement
Table of Contents
