Notes on
Adjusting the
Convergence
Manually
44
❑
Allow the TV to warm up for about 30 minutes before you adjust
the convergence.
❑
For best results, stand about 3 to 5 feet back from the picture
when adjusting the convergence. Begin with the crosses in the
center area of the screen and, once those are adjusted, move to the
crosses on the edges of the screen.
❑
You can make separate adjustments to each wide mode:
,
,
Full/Normal
Zoom
Wide Zoom
definition input. (These features share a common convergence
mode.) The cross pattern looks different in each of these, but the
adjustment procedure is the same. Press the
the remote to toggle through the wide mode screens.
❑
To optimize the conditions for convergence adjustment, in the
Video Menu, set
Mode
settings (see page 92). You can reset the adjustments by pressing
the
button on the remote control.
RESET
, and Memory Stick/1080i high-
to
or
and lower the
Pro
Movie
button on
WIDE MODE
level
Picture