Adjusting The Convergence Automatically (Flash Focus); Notes On Flash Focus - Sony KDP-51WS550 Primary Operating Instructions Manual

Adjusting the Convergence Automatically (Flash Focus)

z
You can also access Flash
Focus in the Setup menu. For
details, see page 103.

Notes on Flash Focus

❑
You cannot perform any other functions until Flash Focus has completed its cycle. If you
perform any other operation while Flash Focus is in progress, the Flash Focus operation is
canceled.
❑
Flash Focus will not set the TV's convergence to the factory setting. To do this, press
while in Manual Convergence mode.
42
The projection tube image appears on the screen in three colors (red,
green and blue). If they do not converge, the color is poor and the
picture blurs. Before you use your TV, be sure to adjust the
convergence. The Flash Focus feature allows you to adjust the
convergence automatically.
✍
It is recommended that you perform Flash Focus about 30 minutes after the
TV is first turned on.
1
Tune to a TV or cable TV program.
2
Press the
FLASH FOCUS
page 15).
The cross pattern appears and Flash Focus begins to work.
The adjustment is completed when the TV picture returns.
To Perform Additional Fine Manual Adjustments
Use the Manual Convergence feature, described on page 43.
button on the front panel of the TV (see
,
RESET