Setting Up The Channel List; Using Auto Program - Sony KDP-51WS550 Primary Operating Instructions Manual

Setting Up the Channel List

Using Auto
Program
After you finish connecting the TV, you need to run the Auto
Program feature, which automatically creates a list of available
analog and digital channels. The Auto Program screens appear when
you turn on your TV for the first time after hooking it up.
To run Auto Program the first time you turn on your TV
1
Press to turn on the TV.
POWER
The Initial Setup screen appears.
2
Using the joystick on the remote control, move the highlight to
the desired language, then press
3
When prompted to start Auto Program, press
Auto Program takes several minutes to complete. A progress bar is
displayed while the channel list is being created.
To run Auto Program again at a later time
❑
Use the Auto Program feature as described on page 98.
To add individual digital channels
❑
Use the Digital Channel feature as described on page 98.
To reset the TV to factory settings
1
Press to turn on the TV.
POWER
2
Hold down on the remote control.
RESET
3
Press on the TV. (The TV will turn itself off, then back
TV POWER
on.)
4
Release .
RESET
to select that language.
to select .
Yes
41