I.link Setup; Notes On I.link - Sony KDP-51WS550 Primary Operating Instructions Manual

i.LINK Setup

To Do This ...
Set up the selected device
Set up Caption Vision
Set up i.LINK Analog Video
(Set-Top Box)

Notes on i.LINK

❑
The TV can act as an i.LINK repeater, so that i.LINK signals can be relayed to another
device even when the TV is powered off. To enable this feature, set the
to using the Setup Menu as described on page 103.
On
❑
Parental Control settings apply to the signal from a selected device. For more details, see
page 100.
You can use the i.LINK Control Panel to access digital setup options,
some of which are also available through the Digital Program Guide
(described on page 63).
Do This ...
Move the joystick to highlight
Once i.LINK Setup has been selected, move the joystick to
press .
✍
For details about setting up Caption Vision , see "Using the Caption Vision
Menu" on page 65.
The TV is able to accept an analog signal from a selected set-top box. The
set-top box must be EIA-775A compliant and must be connected to the TV's
VIDEO 3 input. To associate the device with the TV's analog VIDEO 3 input,
move the joystick to Analog Video
devices will be shown in the list. Select the desired device from the list and
press .
Setup and press .
and press . All EIA-775A-compliant
i.LINK Standby
Caption Vision, and
option
89