Installing The Lct - Ricoh B246 Series Manual

Make sure that the paper size is suitable for the
user.
Users cannot adjust the paper size for the LCT
themselves.
If it is not, move the side fences (see the B473
manual), then change SP 5959 005.
If the user wants to put B4 or Legal paper in the LCT,
you have to install the B4/LG feeder kit, then change
SP 5959 005.
The installation procedure for the LCT is here
The installation procedure for the B4/LG feeder kit starts here.
The procedure for adjusting the LCT for another paper size is not in the main copier
service manual.
Don't forget to change the SP mode setting after changing the size. The users do
not have a user tool to do this if you forget.

Installing the LCT

41
Service manual, section 1-4
Service manual, section 1-5
B473 service manual, page 6
41