Replacement And Adjustment - Ricoh B246 Series Manual

Replacement and Adjustment - 1

Tandem tray
Tandem tray removal
Right tray paper sensor removal
Bottom plate lift wire removal
Paper size change
Trays 1 to 3
Pick-up, feed, and separation roller removal
Separation roller pressure adjustment
• Adjust if there are jams when feeding in from the paper tray.
Feed unit
Have the trainees do the procedures on the slide.
Remind them to follow all notes and cautions in the manual.
First, make sure that the class is aware of the service notes for the paper feed
components.
Tandem tray paper size change
The users cannot do this themselves.
Don't forget to change the SP mode setting after changing the size. The users do
not have a user tool to do this if you forget.
Do the copy adjustments after changing the paper size. (No need to do this in the
class unless the trainees need practise.)
Pick-up, feed, and separation rollers
The rollers in trays 1 to 3 are different from those in the by-pass tray and optional
LCT.
Pressure adjustment
Note the use of this adjustment to solve feed problems at the feed-in area.
224
Service manual, section 3.11
Service manual, section 3.1.10
224