1103: Fusing idling
70 seconds at power on
No idling when recovering from low power mode
1102, 1105: Fusing temperature adjustments
1106: Displays the fusing temperature
1901: Copy speed change for thick paper
1902, 1903: Web unit settings
1906: Displays the readings from the temperature and humidity
sensor (below the toner collection bottle)
1907: Idling before fusing, for OHP and thick paper (default:
enabled)
SP Modes
1105: Fusing temperature adjustment
There are separate adjustments for OHP and thick paper.
1102: For duplex mode
1106: Displays the fusing temperature
1901: Copy speed change for thick paper and tab sheets
This counteracts insufficient fusing problems caused by drops in hot roller
temperature due to the thick paper going through the fusing unit (this cools
the fusing unit much quicker than normal paper).
Reduce the speed if these problems occur.
1902, 1903: These were discussed earlier in this section.
SP Modes
256
256