Advertisement
Operation elements
№ Name
1
Air flow display
2
Hot air iron temperature adjustment
3
Hot air iron air flow adjustment
4
Soldering iron temperature adjustment
5
Desoldering gun temperature adjustment
6
Hot air iron outlet
Fume extraction connection and vacuum
7
connectio for desoldering gun
8
Soldering iron connection
9
Desoldering gun connection
10 Main switch
Commissioning details
Important:
Make sure that the device is on a level surface and that all heat-generating components are in
their holders.
All switches must be in the off position.
All connections must be properly made.
Start-up
1. Connect the device to the power supply using the power cord supplied.
2. Make sure that all function switches are set to Off before you operate the main switch (10) of
the station.
3. The product name is briefly displayed in ticker and then "OFF" on the display panels. This dis-
play remains until the user activates a function.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
№ Name
11 Desoldering gun temperature display
12 Desoldering gun on/off switch
13 Soldering iron temperature display
14 Soldering iron on/off switch
15 Fume extraction on/off switch
16 Hot air iron air flow/automatic display
17 Hot air iron functional switch
18 Hot air iron temperature/automatic display
19 Hot air iron on/off switch
Item 902703A+
Page 8
03
2021-1
Advertisement
