Advertisement
Quick Links
Operation Manual
Antistatic Soldering Station
61538
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 61538
Summary of Contents for WilTec 61538
- Page 1 Operation Manual Antistatic Soldering Station 61538 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 Do Read all safety instructions and notes. Failure to follow the safety precautions and instructions may result in electric shock, fire and/or serious injury. Keep all safety information and instructions for future reference. © by WilTec Wildanger Technik GmbH Item 61538 Page 3 http://www.WilTec.de...
- Page 4 Unless they are supervised or have been instructed regarding the use of the device by a person responsible for their safety, they are not allowed to work with the station. © by WilTec Wildanger Technik GmbH Item 61538 Page 4 http://www.WilTec.de...
- Page 5 While soldering do not give too much pressure on the iron tips. More pressure will not in- crease the thermal conductivity and will result in damages of the iron tip. © by WilTec Wildanger Technik GmbH Item 61538 Page 5 http://www.WilTec.de...
- Page 6 The iron core must be welded off and replaced by the new heating core which can be fitted well and easily. Please remember or note down the previous iron core connection. © by WilTec Wildanger Technik GmbH Item 61538 Page 6 http://www.WilTec.de...
- Page 7 № Name Circuit board Steel tube Handle cover Soldering tip Hand protection Plastic cap 10 Spool Earthing spring 11 Handle cable Heating core 12 Connection plug © by WilTec Wildanger Technik GmbH Item 61538 Page 7 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 8 Compatible tips (6.5 mm diameter) © by WilTec Wildanger Technik GmbH Item 61538 Page 8 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 9 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.