Advertisement
Error display for the soldering iron
The soldering iron is not connected or not connected correctly.
The soldering tip is defective and must be replaced. "PLUG" appears on the
display.
The contacts of the soldering iron or the soldering tip are damaged.
Desoldering gun
1. Moisten the filter pads before use so that they are particularly effective. It is recommended to
rewet the pads regularly.
2. Clean the filter spring and change the filters if they are contaminated.
3. The solder line in the gun can be cleaned with the cleaning needle if necessary.
Exploded view and desoldering gun parts list
№ Name
1
Filter pad
2
Filter holder
3
Desolderin gun body
4
Heating element
5
Nozzle
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
№ Name
6
Heating element housing
7
Safety cap
8
Filter pipe cap
9
Filter spring
10 Filter pipe
Item 902703A+
Page 16
03
2021-1
Advertisement
