Advertisement
Desoldering gun
№ Name
1
Filter holder
2
Eject knob
3
Druckanzeige
4
Vacuum hose
5
Electric cable
1. Plug the connection cable of the desoldering gun into the socket (8) provided on the front of
the device.
2. Follow the instructions under "Commissioning."
3. Connect the vacuum hose to the socket (7) provided for it.
4. Activate the on/off switch (9) of the soldering iron. The desoldering gun now heats up to
350
℃
(basic setting).
5. Set the temperature of the desoldering gun to the desired value using the controller (4).
6. Let the desoldering gun heat up. The tip takes about 5–6 min to heat up while the inner solder
drain takes about 5–9 min longer to reach operating temperature. If the operating temperature
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Function
Securing the filter
Unlocking to remove
the filter
Indicating when the
nozzle
or
heating
element
needs
cleaning, or the filter
needs replacing.
Connecting
to
the
station
Connecting
to
the
station
Item 902703A+
№ Name
6
Trigger
7
Heizelement
8
Heißdüse
9
Filter
Function
Starting the extrac-
tion (press to do so);
do not press if the
nozzle is not fully
warmed up.
Heating; has to be
cleaned regularly.
Melting solder, input
for melted solder
Collecting solder and
flux in a ceramic pa-
per filter
Page 11
03
2021-1
Advertisement
