External Axis Point Teaching; Figure 2-69 External Axis Points - Point Table (1); Figure 2-70 External Axis Points - Point Table (2) - Delta DTV Series User Manual

2.10.4

External Axis Point Teaching

To perform point teaching, jog, or Goto on an external axis, switch the mode to External; press Ext.
Teach to write the external axis information into the table. Column X represents the value of the first
external axis, Y represents the value of the second external axis, and so on. The values in the table are
represented as 1/1000 of the actual values; the Coord column shows Ext., and the Unit column shows
1000 puu.
See Figure 2-69, Figure 2-70, and Figure 2-71.
To move the external axis to a specific position (Ext. Go), switch to the external axis to operate, and
press the three-position operating button
switch to Ext. J1.
at the same time. For example, to operate the first external axis,

Figure 2-69 External axis points - point table (1)

Figure 2-70 External axis points - point table (2)

66
2. Tab Operation and Function Instructions