1229 [Paper Transfer Pressure]; 1230 [Paper Transfer Roller Reverse Rotation] - Ricoh Pro C9200 Operating Instructions Manual

4. Details of Menu Items in Advanced Settings
Setting Item
06: Leading Edge/08: Trailing Edge/09:
Trailing Edge: AC
07: Leading Edge Length
10: Trailing Edge Length

1229 [Paper Transfer Pressure]

Adjust the transfer pressure at the paper transfer section. Select a higher value (1 -> 4) for the
pressurization for paper that is more uneven.
• If the paper transfer pressure is specified differently for different paper types, the throughput is
reduced because of the need to switch the transfer roller pressure when handling a job with sheets
of mixed paper type.
• Note that if you set to [5:Pressure 5], the pressure becomes lower than [1:Pressure 1].
01: Pressure Mode

1230 [Paper Transfer Roller Reverse Rotation]

Adjust the interval to execute smoothing paper transfer cleaning belt. Shorten the interval when using
paper with a lot of paper dust.
• If this is set to be higher than "0", the throughput is reduced because of the paper roller rotating in
reverse during printing.
Setting Item
01: Setting
142
Setting Item
Max. Value Min. Value
10 -10
30 0
100 0
[1:Pressure 1]
[2:Pressure 2]
[3:Pressure 3]
[4:Pressure 4]
[5:Pressure 5]
Max. Value Min. Value
2000 0
Step Unit
1 None
1 mm
1 mm
Values
Step Unit
100 page