Maintenance; Cleaning The Outside; Cleaning Air Suction Filter - Frico SL/SLS-DC1 Original Instructions Manual

GB

Maintenance

Routine maintenance is indispensable to keep the cooler-
convector in perfect working condition, safe and reliable over the
years. This can be done every six months for some interventions

Cleaning the outside

Before every cleaning and maintenance
disconnect the appliance from the mains by switching off the
master switch.
Wait until the parts have cooled down to avoid the risk of
burns.

Cleaning air suction filter

After a period of continuous operation and in consideration of the
concentration of impurities in the air, or when he intends to restart
Extraction of filter cells in the versions with aspiration grill with flaps
- extract the front grill by lifting it slightly and turn it until it comes
right out of its seat;
front grille
A
See grid
B
24
and annually for others, by the Technical Service Assistance,
technically authorised and prepared, using always original spare
parts.
intervention,
When necessary, clean the outer surfaces of the cooler-convector
with a soft cloth damp cloth.
the plant after a period of inactivity, proceed as described.
-
C
D
A
C
Do not use abrasive sponges or abrasive or corrosive
detergents to avoid damaging the painted surfaces.
extract the filter, pulling it horizontally outwards.
filter
extraction filter
B
D