Diagnostic - RACOM RipEX Demo Handbook

RipEX – Live Demo
Fig. 1.3: Detailed Ping report
Feel free to change the packet length (Ping option) or the Modulation rate (Settings tab) in order to see
the impact on the measured RTT. Do not forget to set the same Modulation rate in both units.

1.5. Diagnostic

RipEX web interface is equipped with comprehensive and detailed statistics and graphs. One could
say, there is an embedded NMS (Network Management System) within RipEX.
Every RipEX can broadcast its Watched values to other reachable RipEX units within the network.
Among these Watched values are: current supply voltage, internal temperature, RF output power,
Voltage Standing Wave Ratio on the antenna feed line, packet counters on separate interfaces and
other values.
1.5.1. Neighbours
These Watched values are displayed in the Diagnostic → Neighbours menu. See the following example
with one neighbouring unit.
8 RipEX – Radio modem & Router – © RACOM s.r.o.