Basic M!Dge Configuration - RACOM RipEX Demo Handbook

Fig. 3.28: M!DGE Login screen
The Web Manager can always be reached via the Ethernet interface. After the successful setup, Web
Manager can also be accessed via the mobile interface.

3.11. Basic M!DGE Configuration

Before you begin any operation in the mobile network, at least the following steps have to be performed:
• Defining the admin password (already done in Chapter Section 3.10.2, "Programming M!DGE via
Computer").
• Entering the PIN code for the SIM card if required.
• Configuring the Access Point Name (APN).
• Starting the mobile connection.
Please see the M!DGE manual for configuration details: http://www.racom.eu/eng/products/m/midge1/in-
dex.html
Since the best way to understand the product is through practice, we have described a few practical
tests you may wish to conduct.
3.11.1. First Mobile Connection
If you have a SIM card inserted and you are logged into the M!DGE unit, we can proceed with a basic
Mobile configuration steps.
SIM Configuration
Go to the INTERFACES → Mobile → SIMs menu and click on the Edit button.
© RACOM s.r.o. – RipEX – Radio modem & Router
Demo Case – RipEX & M!DGE
45