Table of Contents
Advertisement
1. RipEX – Live Demo
1.1. Introduction
RipEX Live demo should answer most of your questions regarding the RipEX product and give you a
quick and easy summary about the product itself.
There are two RipEX units connected to each other via a radio channel available 24/7 for testing. The
units are set to factory settings every day at 02:00 GMT. Each access password is valid for one week
and is changed every Monday at 02:00 GMT. The login name remains the same.
You may access RipEX live demo units on the following IP addresses:
•
RipEX-A: https://89.190.53.163:8001
•
RipEX-B: https://89.190.53.163:9001
If you do not have the login credentials yet, feel free to contact us using the following link:
http://www.racom.eu/eng/products/remote-access.html#load%28product=ripex%29
RipEX Live demo settings have the following minor changes compared to RipEX factory settings:
•
Unit names – RipEX-A and RipEX-B
•
Ethernet IP addresses – 192.168.169.169 and 192.168.169.170
•
Modulation rate – 20.83 Kbps (4CPFSK)
•
RX/TX frequency – 448.250 MHz
1.2. General Overview
RipEX Live demo gives you the most straightforward way to discover and understand all RipEX features
and functionalities. Pay attention to the Settings tab, where one can set most configuration parameters.
A few clicks will give you an easy summary about the product faster than reading many pages of text.
© RACOM s.r.o. – RipEX – Radio modem & Router
RipEX – Live Demo
5
Advertisement
Table of Contents
