Wizard Configuration; Practical Tests - RACOM RipEX Demo Handbook

Radio modem & router

Hide thumbs Also See for RipEX:

Table of Contents

RipEX – Live Demo

For detailed parameter descriptions, click on the Help button. Kindly note, balloon tips are also available

for some parameters.

Keep in mind that accessibility of some parameters depends on the settings of other parameters. For

example serial SCADA protocols on COM ports can only be set when Operating mode is set to the

Router mode.

Fig. 1.1: Help question marks and balloon tips

1.3. Wizard Configuration

The easiest procedure to configure the units in real usage is to use our Wizard feature. Click on the

Wizard tab to be guided through all necessary settings. The Wizard will provide you with helpful notes

for respective parameters.

Since the best way to understand the product is through practice, we have described a few practical

tests you may wish to conduct.

1.4.1. Ping

Ping is the basic tool for checking connectivity between two hosts with IP addresses. Because RipEX

is a native IP device, ping can also be used for radio link testing.

Table of Contents

Ripex-a Ripex-b