Extron electronics RGB-DVI 300 User Manual page 58

Serial Communications, cont'd
6. Choose the RS-232
7. Select the correct
8. Click the Browse
9. Click Upload. The
N
10. When the "Transfer
RGB-DVI 300 and RGB-HDMI 300 • Serial Communications
4-20
tab.
com port and
baud rate (default
rate is 9600) from the
drop-down menus
and click OK.
button and navigate to
the folder where the
firmware file was saved
(see step 4).
firmware transfer begins
and takes approximately
3 minutes.
During the firmware upload, the front panel LED and
video output are disabled.
Complete!" message
appears, click the Exit
button and exit the
Firmware Loader.