Extron electronics RGB-DVI 300 User Manual page 30

Operation, cont'd
brightness, detail, horizontal and vertical centering, and
horizontal and vertical size can be saved. User presets can be
saved on one input rate and recalled for a different input rate.
To save user presets, navigate to the User Presets > Save sub-
menu. Use the
Enter to save, and press Menu to exit.
When a preset has been saved, it can be recalled or cleared using
the Recall or Clear options. Select a memory preset (1, 2, or 3)
to be recalled or cleared and press Enter.
N
User Presets
Contrast
Brightness
Detail
An additional sixteen presets (input presets) are available
through SIS commands only. Input presets save picture control
settings (the same values saved by user presets) and input
configuration values (input type, total pixels, horizontal and
vertical starts, horizontal and vertical active areas and phase).
The exact settings of a source are saved and can be recalled each
RGB-DVI 300 and RGB-HDMI 300 • Operation
3-12
{
knob to select user preset 1, 2, or 3 and press
The brackets <> around the current selection are only
visible when that function (recall, save, or clear) has been
activated. Attempts to recall a memory preset that has
not yet been saved, and "Invalid Preset" message will
appear on the on-screen display.
Input Presets
H position Input type
V position Total Pixel
H size Contrast
V size Brightness
Zoom Detail
H start H position
V start V position
H active H size
V active V size
Phase Zoom