MOUNT ASSEMBLY
With multiple options in both the upper and lower mount assemblies, the PM-100 allows for versatile adjustment of the unit's position
and angle within the tank. For ease of use and movement, Kasco recommends running the cable from the unit through the hollow
center of the pipe.
Upper Mount Base Installation
1. Install the upper mount base (A)
as desired within the tank (hard-
ware not included).
2. Insert the 1/2"-13 x 1/4" shoulder screw (E) as specified below for either vertical (Fig. 9) or horizontal (Fig. 10) mounting.
3. Fasten with a serrated flange nut (F).
E
Fig. 9: Vertical mounting option
PM-100 CERTISAFE™ PIPE MOUNT
Fig. 8: Hole location and dimensions for the upper mount base (A).
F
9
Fig. 10: horizontal mounting option
Back to Contents
MANUAL
852113 / 2021.1.1