Table of Contents
Advertisement
Back to Contents
PM-100 CERTISAFE™ PIPE MOUNT
MANUAL
Note: Steps 8 through 11 are best completed with two people.
8. Move the entire assembly into place over the installed upper mount base (A).
9. Align the slot of the pipe bracket (B) with the shoulder screw (E) installed in the upper mount base.
10. Lower the pipe bracket until it rests on the shoulder screw.
11. Install the 1/2"-13 x 1-3/4" serrated flange screw (D) in the top hole on the bracket and secure with a serrated flange nut (F).
A
F
B
D
Fig. 24
Fig. 25
E
You can adjust the position of the CertiSafe™ unit
by swiveling the pipe either direction and/or moving
it vertically through the upper mount pipe bracket.
Fig. 26
852113 / 2021.1.1
13
Advertisement
Table of Contents
