Table of Contents
Advertisement
5. Fit the strut-block assembly over the can strap, aligning the bottom holes on each strut with the screw and nut on the
can strap flanges.
Fig. 14
6. The mounting position of the unit is adjustable. Align the center hole in the strut-block assembly with the left, center, or right hole in
the can strap assembly to position the CertiSafe™ Tank Mixer as desired.
Fig. 16
7. Fasten the unit in the selected position using a
3/8"-16 x 1" hex head screw (K) and 3/8" nylon
locknut (M).
PM-100 CERTISAFE™ PIPE MOUNT
Align with can strap hardware
Fig. 15
K
Fig. 17
11
Back to Contents
MANUAL
M
852113 / 2021.1.1
Advertisement
Table of Contents
