Table of Contents
Advertisement
4.1 Main switch
WARNING:
instructions carefully before you start the
product.
WARNING:
away from the rotating blades. Do not put
your hands or feet near to or below the
product when the cutting motor is on.
WARNING:
when persons, especially children, or
animals are in the work area.
•
Set the Main switch in the
product.
•
Set the Main switch in the
product is not in use or before you do inspection or
maintenance on the product.
4.2 To start the product
1.
Press the STOP button to open the hatch.
2.
Set the main switch to position
3.
Enter the PIN code.
4.
Push the START button.
5.
Close the hatch.
Note:
If the product is parked in the charging station,
the product will only leave the charging station when the
1285 - 006 - 17.03.2021
4 Operation
Read the safety
Keep your hands and feet
Do not use the product
1 position to start the
0 position when the
1 .
battery is fully charged and if the timer allows the
product to operate.
Note:
Press the START button before closing the
hatch to start the product. If the START button is not
pressed, a message beep is heard and the product will
not start.
4.3 Operating modes
Push the Operation selection button to select the
following operating modes:
Home
•
Auto
•
•
Man
4.3.1 Home mode
Home means that the product remains
Operating mode
in the charging station until a different operating mode is
Home mode is also used to test if the
selected. The
product can follow the guide wire and dock with the
charging station.
4.3.2 Auto mode
The
Auto mode is the standard operating mode where
the product mows and charges automatically.
4.3.3 Manual mode
To mow secondary areas the operating mode
Man mode, the operator must move
be chosen. In the
the product manually between the main area and the
secondary area. The product mows until the battery is
empty.
When the battery is empty, the product stops and the
message
Needs manual charging shows in the product
display. Put the product in the charging station to charge
the battery. When the battery is charged, the product
moves out of the charging station and stops. The
product is now prepared to start operation, but needs
confirmation from the operator first.
Man must
Operation - 25
Advertisement
Table of Contents
