Closing The Swing-Away - Harmar Mobility Paragon OUTLANDER FULL Owner's Manual & Warranty Information

Hide thumbs Also See for Paragon OUTLANDER FULL:
Table of Contents

Advertisement

OUTLANDER VEHICLE LIFTS: SECTION 3
OPERATION

CLOSING THE SWING-AWAY

Close the swing-away by returning it to the stowed
position. See Figure 3-12.
Figure 3-12
1. The swing-away will latch itself when closed.
When properly latched the ball will move
forward. See Figure 3-13.
Figure 3-13
WARNING
!
Verify that the swing-away is properly latched
by trying to reopen the swing-away without
unlatching a few times.
Outlander Vehicle Lifts:
12
30JULY2020 | 630-00132 REV B
Owner's Manual
2. Install the safety pin. Be sure that the safety pin
is fully inserted to the ring.
See Figures 3-14 and 3-15.
Figure 3-14
Figure 3-15
WARNING
!
Be sure to stay clear, keeping fingers, hands and
clothing away from the latching mechanism to
avoid personal injury. See Figure 3-12.
Safety pin must be installed before transit to
avoid damage and injury. See Figure 3-14.

Advertisement

Table of Contents
loading

Table of Contents