Fitting Probe Measuring Tips Onto The Testo Saveris Multifunction Handle; Carrying Out Measurements; Measurements With The Standard Version Of The Multifunction Handle; Measurements With Auto-Hold Function Enabled - TESTO Saveris 0560 1020 Instruction Manual

9 Operation
9.1 Fitting probe measuring tips onto the
testo Saveris multifunction handle
The connection plug for the probe measuring tips has two different
guides.
For the negative temperature application, the contact surface of the
probe measuring tip's connection plug must be cleaned before
mounting.
1
Make sure that the probe measuring
tip's connection plug is placed into
the appropriate guide for the testo
Saveris multifunction handle. (Insert
with the label at the top.)
2 Screw the probe measuring tip securely onto the testo Saveris
multifunction handle using the union nut.

Measurements can now be carried out.
9.2

Carrying out measurements

To transmit readings, the testo Saveris multifunction handle must be
switched on and connected to a mobile device via Bluetooth
symbol on the display lights up continuously.
9.2.1 Measurements with the standard version of
the multifunction handle
9.2.1.1

Measurements with Auto-Hold function enabled

The required probe measuring tip is fitted and the multifunction handle

is switched on.
1
Position the probe measuring tip in or on the medium being
measured.

A measuring value is automatically generated by the probe measuring
tip that is fitted. The current reading and
2
Wait until
14
Auto-Hold appears on the display.
Auto flash.
®
. The