Readings are automatically held by the instrument.
3
If you want to switch back into the measuring mode, press the
button for a short time (< 1 s).
4
Press the
device.
9.2.1.2
Measurements with Auto-Hold function disabled
The required probe measuring tip is fitted and the testo Saveris
multifunction handle is switched on.
1
Position the probe measuring tip in or on the medium being
measured.
2
Wait until the reading on the display of the testo Saveris multifunction
handle has stabilized.
The reading stops changing.
3
Press the
Hold
is shown on the display and reading is held.
4
Press the
device.
5
If you want to switch back into the measuring mode, press the
button for a short time (< 1 s).
Hold function is disabled and current readings are displayed.
6
Press the
device.
9.2.2
Measurements using the instrument variant
with internal temperature stabilization
9.2.2.1
Measuring in real-time mode
The required probe measuring tip is fitted and the multifunction handle
is switched on.
button to send the measuring values to your mobile
button for a short time (< 1 s) to hold the reading.
button to send the measuring values to your mobile
button to send the measuring values to your mobile
9 Operation
15