9 Operation
>
Position the probe measuring tip in or on the medium being measured.
The current measurement value is shown.
Values measured in real-time mode cannot be transmitted and thus
cannot be saved. To do this, please switch to temperature stabilization
mode (TTS).
9.2.2.2
Measuring with temperature stabilization mode
(TTS)
The required probe measuring tip is fitted.
The multifunction handle is in real-time mode. The current
measurement value is shown.
1
Position the probe measuring tip in or on the medium being measured.
2
Press the
Exception: automatic start with penetration temperature probe and
temperature > 45 °C.
TTS mode is enabled.
The stabilized maximum value is determined.
The reading indicator flashes on the display
As soon as the reading is stable, it is automatically transmitted to the
mobile device.
The multifunction handle goes back to real-time mode.
As soon as the penetration temperature probe measures a temperature
drop, a new measurement can be carried out in TTS mode (> 45 °C).
Depending on the application, the response time must be taken into
account, see
16
key.
flashes briefly.
Technical data
for the individual probes.